Base servo drive for configuration flexibility Digitax HD M751 Base servo drive offers configuration


Quantity: In Stock

Category: Digitax HD Servo Drive Series

Quick Overview:

Share: Messenger


Network servo drive for centralized and decentralized motion applications

Digitax HD M751 Ethernet is a network servo drive for centralized and decentralized motion applications, featuring the SI-Ethernet option module enabling support of real-time Ethernet, including RTMoE (Real-Time Motion over Ethernet).

The new Digitax M751 Ethernet servo drive also hosts the on-board Advanced Motion Controller for distributed 1.5 axis motion control.

  • Features
    Maximum performance
    • 300% peak current performance pulse-duty overload
    • Optimized control loops for high dynamic performance
      • 62.5 μs current loop
      • 250 μs position and speed loop
    • Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
    • Supports a wide range of feedback technologies including Quadrature, SinCos (including absolute), SSI, BiSS, EnDat (up to 4 Mb with EnDat 2.2) and resolvers
    • Maximum performance package with high torque density, low inertia Unimotor hd servo motors
    • Supports RTMoE (Real-Time Motion over Ethernet) which provides synchronized communication between drives using the Precision Time Protocol as defined by IEEE1588 V2:
      • Distributed clocks are used to automatically synchronize the position, speed and current loops across all drives
      • 1 ms cycle time for synchronous cyclic dat
      • High speed network synchronization of less than 1 μs jitter (typically (typically <200 ns) and 1 ms cycle time for synchronous cyclic data
    • Advanced 1.5 axes Motion Controller, key features include:
      • Real-time tasks
      • 250 μs cycle time
      • Motion profile generator
      • Electronic gearbox
      • Interpolated CAM
      • Homing functions
      • High speed position freeze

    Minimum size
    • 40 mm drive width and option bracket adds 22 mm, providing a highly competitive maximum drive width of 62 mm
    • Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard).
    • Fits into cabinets just 200 mm deep

    Easy installation and setup
    • DIN rail alignment
    • Kits for easy multi-axis installation
    • Single motor cable and electronic motor name plate for fast set up
    • Seamless motor-drive pairing with Unimotor hd servo motors
    • Easy access pluggable connectors
    • Rapid commissioning with the Unidrive M Connect PC tool and SD cards
    • Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features
      • Programmable with IEC61131 standard languages

    Flexibility
    • Two option slots for functionality extension and customisation (see available option modules)
    • Built-in RS485 communications

    Safety on-board
    • Reduced downtime with machine safety
      - Integrated dual safe torque off
      - Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)
  • Options

    Keypads

    Remote-Keypad-RTC Remote Keypad RTC
    The keypad is remote mountable, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). Three line plain text, multi-language LCD keypad for rapid set-up and helpful diagnostics. Battery operated real-time clock allows accurate time stamping of events, aiding diagnostics.
    KI Compact Display Option module for servo drive KI Compact Display
    The display (fitted on M753, optional on M751) ensures access to drive diagnostics even in the absence of network connectivity. Includes 2 rotary switches for hardware setting of the node address for faster commissioning of the motion network.
    KI-Compact-485-Adaptor KI-Compact 485 Adaptor
    This allows the drive to communicate via RS485. This is commonly used for programming if the drive has no keypad.

    System Integration Modules - Feedback

     SI-Encoder  

    SI-Encoder
    Quadrature encoder input interface module.

     SI-Universal-Encoder

    SI-Universal Encoder
    Encoder input and output interface supporting Quadrature, SinCos, EnDat and SSI encoders.

    System Integration Modules - Communications

     SI-PROFIBUS

    SI-PROFIBUS
    SI-PROFIBUS interface module enables follower connectivity. It is possible to use multiple SI-PROFIBUS modules or a combination of SI-PROFIBUS and other option module types to add additional functionality such as extended I/O, gateway functionality or additional PLC features.

     SI-DeviceNet

    SI-DeviceNet
    SI-DeviceNet enables follower connectivity. It is possible to use multiple SI-DeviceNet modules to provide additional functionality.

     SI-CANopen

    SI-CANopen
    Digitax HD's SI-CANopen interface module supports various profiles, offering optimum flexibility.

     SI-Ethernet serial communication option module

    SI-Ethernet
    SI-Ethernet can be used to provide high speed drive access, global connectivity and integration with IT network technologies. 

      SI-EtherCAT

    SI-EtherCAT
    SI-EtherCAT allows Digitax HD servo drive to connect and interface with EtherCAT networks.

     SI-PROFINET SI-PROFINET RT
    SI-PROFINET allows Digitax HD to communicate and interface with PROFINET PLCs and networks.

    System Integration Modules - Applications

    SI Apps Compact

    SI-Apps Compact
    Compatible module allows SyPTPro application programs to be re-complied for HD.

    MCi200 Machine Control

    MCi200
    Second processor, providing advanced customization using industry standard IEC61131-3 programming languages.

     MCi210 Machine Control

    MCi210
    Extended advanced machine control, provides MCi200 functionality with additional ports and simultaneous connectivity to 2 separate Ethernet networks.

    System Integration Modules - Additional I/O

     SI-IO System Integration Modules

    SI-I/O
    Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays.

    Drive interface units - Communications

    CT USB Communications Cable
    The USB Communications cable allows the drive to connect to a PC for use with our PC tools*.

    * Also requires KI-Compact-485 adaptor.

  • Software

    Commissioning and monitoring software

    Unidrive-M-Connect

    Connect - Commissioning tool
    Based on Control Techniques’ 25 years' experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.

     Automation and motion programming software

    Machine-Control-Studio Machine Control Studio - Programming tool
    Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Digitax HD’s new automation and motion control features.


Sorry, Currently No Video Uploaded.
Sorry, Currently No File Uploaded.

Base servo drive for configuration flexibility Digitax HD M751 Base servo drive offers configuration


Please Leave Your Product Enquiry Here. We will Get Back To You Soon.

Product Specifications

  • Product SKU : -
  • Weight (GRAM) : -
  • Dimension : -