Control Techniques High Frequency AC Drives, Unidrive HS30

Quantity: In Stock

Category: Unidrive M

Quick Overview:

Share: Messenger

0 – 3,000 Hz Open Loop

0.25 kW – 7.5 kW (0.33 hp – 10 hp)

200 V / 400 V

Unidrive HS30 is designed for applications that require cost effective integration into safety systems and incorporates dual Safe Torque Off and advanced Rotor Flux Control (RFC-A) of open loop induction motors.

  • Features

    Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems

    • HS30 has integrated dual STO inputs for SIL3, PLe conformity, eliminating the need for external safety components

    Improve throughput with advanced open-loop motor control algorithms

    • Rotor Flux Control (RFC-A) gives maximum stability and control of induction motors at all powers.
    • 180% motor overload suitable for heavy industrial machinery applications

    Flexible system integration with SI communications options

    • HS30's SI interface enables integration with a wide range of available industry standard fieldbuses and I/O

    Install and configure quickly and easily

    • Simple fixed LED keypad
    • Useful parameter guide located on the front of the drive
    • Use Unidrive M Connect or an SD card with the AI-Backup adaptor to clone and transfer parameter sets
    • DIN rail mounting is supported below 1.5 kW
  • Specifications

    Key data

    • Heavy Duty rating: 0.25 - 132 kW (0.33 - 179 hp)
    • Supply phases:
      • Size 1 to 4: 110 V drives – 1 phase, 230 and 400 V drives - 1 or 3 phase
      • Size 5 upwards: 3 phase

    Standard features

    Machine safety:

    • 2 x Safe Torque Off terminals


    • Fixed LED

    Option slots:

    • 1 (Size 2 and above)

    Parameter cloning via:

    • PC tools
    • SD card with AI-Smart Back Up
    • AI-Smart Adaptor


    100 V (100 V - 120 V ± 10%)

    200 V (200 V - 240 V ± 10%)

    400 V (380 V - 480 V ± 10%)

    575 V (500 V - 575 V ± 10%)

    690 V (500 V - 690 V ± 10%)



    Open loop vector or V/Hz induction motor control

    Open loop Rotor Flux Control for induction motors (RFC-A)

    Open loop permanent magnet motor control (RFC-S)


    Closed loop Rotor Flux Control for induction motors (RFC-A)


    Closed loop permanent magnet motor control (RFC-S)


    Active Front End (AFE) power quality convertor












    160 x 75 x 130
    DIN rail mounting*
    137 x 75 x 130
    6.3 x 3.0 x 5.1
    DIN rail mounting*
    5.4 x 3.0 x 5.1
    0.75 1.65


    205 x 75 x 150
    DIN rail mounting*
    180 x 75 x 150
    8.1 x 3.0 x 5.9
    DIN rail mounting*
    7.1 x 3.0 x 5.9
    1.0 2.2


    226 x 90 x 160 8.9 x 3.5 x 6.3 1.5 3.3


    277 x 115 x 175 10.9 x 4.5 x 6.9 3.13 6.9
    *Additional fixings required to maximize security
  • Options



    Remote keypad
    All the features of the CI-Keypad LCD, but remote mountable. This allows flexible mounting on the outside of a panel and meets IP66 (NEMA 4)

    System Integration Modules - Communications

    PROFIBUS interface module


    DeviceNet interface module


    CANopen interface module.

    External Ethernet module that supports EtherNet/IP and Modbus TCP/IP

    EtherCAT interface module

    PROFINET interface module

    System Integration Modules - Additional I/O

    Extended I/O interface module to increase the number of I/O points on a drive

    Drive interface units - Back-up

    AI-Back-up Adaptor
    Port adaptor for SD card parameter cloning, and an input for 24 V back-up
    AI-Smart Adaptor
    Has a built-in memory for parameter cloning, and an input for 24 V back-up

    Drive interface units - Communications

    AI-485 Adaptor 24 V
    Port adaptor that allows the drive to communicate via RS485. Includes an input for 24V
    CT USB Comms Cable
    The USB Comms cable allows the drive to connect to a PC for use with Unidrive M's PC tools*


    * Also requires an adaptor.

  • Software

    Commissioning and monitoring software

    Unidrive M Connect - Commissioning tool
    Based on Control Techniques’ 25 years' experience, Unidrive M Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance

     Automation and motion programming software

    Machine Control Studio - Programming tool
    Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Unidrive M’s new automation and motion control features.

Sorry, Currently No Video Uploaded.
Sorry, Currently No File Uploaded.

Control Techniques High Frequency AC Drives, Unidrive HS30

Please Leave Your Product Enquiry Here. We will Get Back To You Soon.

Product Specifications

  • Product SKU : -
  • Weight (GRAM) : -
  • Dimension : -